Tile & Stone Adhesive

BRONCO® CEMSHIELD ETA is a solvent free thixotropic, two part epoxy adhesive especially formulated for bonding heavy duty ceramic tiles, marble ,granite slabs etc

Advantages

• High bond strength.
• Non slump
• No primer required
• High initial and ultimate strengths.
• Impermeable to liquids and water vapour
• Chemical resistant and water resistant
• Suitable for dry and slightly damp concrete surfaces (Moisture tolerant)
• Hardening is not affected by humidity
• Thixotropic: non‐sag in vertical and overhead applications
• Solvent free and chemical resistant
• Hardens without shrinkage
• Different coloured Parts (for mixing control)

Area Of Application

• Vertical surface like walls
• Tank linings
• Horizontal surface like floorings
• Basements
• Roofs
• Sloped
• Inclined
• surfaces like sloped roofs etc.

BRONCO® DURA FIRM is a high polymer modified, white cement based tile adhesive suitable for fixing wall and floor tile & natural stone

Area Of Application

• Wall and floor tiles
• Mosaics
• Vitrified and fully vitrified tiles
• Marble
• Terrazzo and natural stone

Advantages

• Can be used on damp substrates
• Offers high adhesive bond strength
• Excellent slip resistance
• High early strength
• Fast curing
• Water resistant
• Long open wet time
• Thixotropic property
• Tropicalized and eco‐friendly, offers no health hazards to users.
• Economical

BRONCO® DURA FLEX is a ready to use, thin or thick bed, water resistant, pre‐mixed single component,cementitious polymer modified high strength tile adhesive.

Area Of Application

• Fixing Ceramic
• Vitrified
• Mosaic
• Marble and Granite Tiles

Advantages

• Can be used on damp substrates
• Offers high adhesive bond strength
• Excellent slip resistance
• High early strength
• Fast curing
• Water resistant
• Long open wet time
• Thixotropic property
• Tropicalized and eco‐friendly, offers no health hazards to users.
• Economical

BRONCO® DURA NSA is a ready to use, thin or thick bed, water resistant, premixed single component, cementitious polymer modified multipurpose tile adhesive

Area Of Application

• Bonding Ceramic
• Vitrified tiles to concrete surfaces floors and walls
• It can also be used for fixing Aerated Autoclave Lightweight Concrete blocks (AAC) or CLC blocks.

Advantages

• Can be used on damp substrates
• Offers high adhesive bond strength
• Excellent slip resistance
• High early strength
• Fast curing
• Water resistant
• Long open wet time
• Thixotropic property(Economical.)

BRONCO® DURA TILE MORTAR is a ready to use grey cement based non-shrink, self- curing tile adhesive for floor tiles fixing.

Area Of Application

Fixing ceramic and mosaic tiles on floor surfaces.

Advantages

• Ready to use, only water to be added.
• Contains special chemicals to obtained non-shrink and excellent adhesion properties.
• Better bond than conventional cement based mortar.
• Fast setting and quick strength development.
• Self-curing.
• Good mechanical strength.
• Suitable for fixing ceramic and mosaic tiles on floor.